If you're looking to save some money on your haircuts or want to take care of your hair yourself, you need to learn how to trim your neckline. It's a simple process, but you can get an ugly haircut if you don't do it correctly. This article will show you how to maintain your haircut by yourself using a simple barber kit and a neck hairline template. We'll also give you some tips on how to clean up your sideburns and trim your neckline correctly. Follow these steps, and you'll be able to keep your haircut looking sharp for longer!

 

Step One: Get the Essential Tools

If you want to trim your neckline correctly, you'll need some tools. First, you'll need a sharp pair of scissors, not kitchen scissors. Second, you'll need clean electric clippers that are freshly oiled. A comb and an Edgup neck hairline template.  This will help you get a clean, straight line. And finally, you may want to use a razor to clean up your sideburns.

 

Tools You'll Need:

• Sharp Barber Scissors
• Clean Electric Clippers, freshly oiled
• Comb
• Edgup Neckline Template
• Razor

 

Step Two: Clean Up Your Sideburns

 

Before trimming your neckline, you'll want to make sure your sideburns are clean and cut. Use your scissors to trim any stray hairs, and then use your razor to clean up the edges.

First, use your electric trimmer to trim up the bottom edge of your sideburn so it's straight and at length you like. An excellent general guideline is that your sideburn should be parallel to the middle of your ear.

 

Step Three: Trim Your Neckline

The EdgUp Neckline Shaving Template makes it easy to trim your neckline correctly. It's a hands-free template that fits comfortably against your head, allowing you to see exactly where you're cutting. This eliminates the risk of mistakes and results in a perfectly trimmed neckline every time!

To use the EdgUp Neckline Shaving Template, place the template against your barber's existing neckline and use your trimmers to shave along the edge carefully. Be sure to go slowly and avoid pressing too hard, so you don't cut yourself. Performing this task can be done with or without using a mirror. When you're finished, remove the template and rinse off your neck.

That's all there is to it! By following these simple steps, you can easily maintain your haircut at home without having to visit the barber every few weeks.

Plus, you'll save yourself a lot of money in the long run by cutting your own hair! Give it a try today and see for yourself how easy it is to get a great-looking haircut and maintain it for weeks! And be sure to check out the EdgUp website for more tips and tricks on how to get the perfect shave every time.

 

7 Tips for Cutting Your Own Hair, So You Don't Screw It Up

I never had a barbershop in my life. I've been cutting my own hair for over a decade. The refusal of my father to get my brother a haircut turned into an active life-long hobby. Hairstripping for males in my family is regarded as a ritual and an ancient tradition that started with my father's grandfather cutting his hair. We would go to the backyard or basement, grab the cutting table and equipment, and my dad would get to work. The constant sound of clippers underscored the conversation. Traditional masculinity rarely entails intimacy, particularly with grooming or appearance. In my family, it was different. For as long as I can remember, my father has been cutting my hair.

 

It wasn't until I went to college that I realized how much of an outlier this made me. Getting a haircut every two weeks was average; most guys even had their own personal barber. On the other hand, I had never stepped foot in a barbershop. I have been cutting my own hair and that of my brother's since we were young.

 

The idea of someone else cutting my hair was strange to me. It felt like a loss of control. And so I continued to cut my own hair throughout college and my early years as a working adult.

 

There are definitely some advantages to cutting your own hair. For one, it's a lot cheaper than going to the barber. And two, you can cut your hair whenever and however you want. But there are also some disadvantages. Namely, it's easy to screw up your haircut if you're not careful.

 

Here are seven tips for cutting your own hair, so you don't screw it up

Tip #01: Invest in Good Quality Hair Cutting Tools

To cut your own hair, you obviously need some good-quality hair-cutting tools. This includes scissors, clippers, and razors. You can find all of these things at your local beauty supply store. Just make sure you get a good quality pair of scissors - they'll last longer and cut better than the cheap ones.

 

Tip #02: Learn How to Use Your Hair Cutting Tools Properly

Before you start cutting your own hair, it's important that you learn how to use your hair cutting tools properly. This includes learning how to hold the scissors, how to position the clippers, and how to shave with a razor. If you don't know how to use these tools properly, you could easily damage your hair or hurt yourself.

 

Tip #03: Decide What Style You Want Before You Start Cutting

One of the most important things to do before you start cutting your own hair is to decide what style you want. Do you want a short haircut or a long haircut? Do you want it spiked or slicked back? There are endless possibilities for hairstyles, so take some time to browse through pictures and find one that you like.

 

Tip #04: Cut Your Hair When It's Dry

One mistake that many people make when cutting their own hair is cutting it when it's wet. Wet hair is much easier to cut than dry hair, but it's also more likely to result in an uneven haircut. So, always make sure your hair is completely dry before cutting.

 

Tip #05: Use a Mirror

Another mistake people make when cutting their hair is not using a mirror. It's essential to use a mirror so you can see what you're doing and avoid making any mistakes. If you don't have a full-length mirror, at least use a handheld mirror to see the back of your head.

 

Tip #06: Start with the Easy Stuff

If you're not confident in your ability to cut your own hair, start with the easy stuff first. This includes cutting your bangs or trimming your split ends. Once you get comfortable doing these things, you can move on to more challenging styles.

 

Tip #07: Take Your Time

Rushing through your haircut will only lead to mistakes. So, take your time and make sure you're happy with the results before moving on to the next step. If you rush, you'll likely have an uneven or poorly executed haircut.

 

Cutting your own hair can be a great way to save money and time. But it's essential that you take the proper precautions so you don't end up with a bad haircut. Follow these tips, and you'll be able to cut your own hair like a pro in no time.

 

How to Give Yourself a Fade?

The fade cut is proving popular and can sometimes prove challenging to learn at home. We will share some techniques to help you get the fade at home.

First, identify the area of the fade.

Second, take an electric razor, set it to number two or three, and start shaving the hair in downward strokes, being extra careful not to go too high up on the head.

Finally, clean up any stray hairs with a straight razor. You can also use a trimmer to even things out. Use these tips, and you will have a fade at home in no time!

 

What do you think?

Do you have any other tips on how to maintain your own hair?

Now that you know how to trim your neckline, you can keep your haircut looking sharp between visits to the barber. Just follow these simple steps and you'll be able to maintain your haircut easily! Thanks for reading and if you have any questions, feel free to leave a comment below.

-EdgUp: The Original Neck Shaving Template-